Chemical Guys TORQ Foam Blaster 6 Foam Wash Gun

This foam blaster is fantastic! I should have bought one of these years ago…honestly. It foams up nicely and I can cover my whole truck in less than 1 minute with foamy bubbles and soap. Let it soak for a few minutes and then I’ll spray it again and then wipe it all by hand using a soap mitt. This works great and saves me a lot of $ at the car washes. I wash my truck every week ( or 2 weeks tops ) so this tool is a must have for anyone who loves their vehicle and that washes it all the time. This would make a great gift for the guy or girl in your life that loves to wash their car 🙂

This really makes washing your vehicle a whole lot easier! And it’s much quicker than filling buckets up to get soap, over and over. It also does a better job to wash the paint and rims etc as you can leave it to sit and soak in. Highly recommended!

Mine came with a rubber gasket for the garden hose to mate with, so it wasn’t missing or anything. In spite of that, even when I screwed the sprayer all the way on to my hose, it continued to leak from that location. Not a bad leak, just a fast trickle most of the time, but still very annoying and a waste of water.

When the foam blaster is not attached, the sprayer can used like a normal garden hose sprayer. It has an adjustable nozzle that can be twisted to change the size/shape of the ‘cone’, sort of. I call it a ‘cone’ because the spray distribution around the cone is uneven and spotty such that it doesn’t really resemble a cone anymore and it isn’t very useful, it’s definitely not as good as a normal sprayer. The most useful setting for me was a somewhat focused stream.

When the foam blaster is attached, it does work! Had to spray kind of close to the target since the pressure is not amazing, the foam was kind of just lopping on to the car rather than blasting. Goes through product really quick, I had maybe a minute or two of spraying and then I had to refill the tank. Takes practice.

Straight out of the box, the first Torq Foam Blaster 6 I purchased, leaked between the base of the black foaming wand and the green mixing head, as shown in some of the reviewer’s pictures. If yours does that, return it. I exchanged mine for another, received the replacement within 3 days, and it works perfectly, with absolutely no leaks anywhere. The device is made mostly of plastic, however the brass is actually brass, and not just aluminum sprayed with what appears to be a brass coating. Originally purchased for those quick in between car washes, I find myself reaching for it more often than not because it’s that quick, simple, and effective.
I wanted to finally get rid of, so used the last of my Meguiars Gold Class soap, put the dial on 3, and this thing threw a surprising amount of suds with a soap not really designed to foam.
I first rinsed, then foamed the entire car. As I washed, I could simply disconnect the container from spray nozzle, rinse vehicle, re-attach container to spray nozzle and cover entire vehicle (water causes water spots, not suds) a second time for the contact wash. It takes mere seconds to go from foaming to rinsing and back to foaming. I do saturate my mitt with suds, rinse and re-saturate said mitt for each panel, as well as re-foam each panel as I contact wash. Again, the design takes only seconds to remove and re-attach. The suds provide the lubricity to help minimize the inevitable micro-marring that comes with a contact wash. After two full passes, wash mitt saturation, and re-foaming each panel, I have just less than half a bottle of mixture left. Amazing! To be clear, this does not produce that thick shaving cream foam you get using a power washer and foam cannon; it produces SUDS. It’s good for loosening the topical contaminants, and after rinsing, the second and subsequent foaming provides lubricity for the contact wash. As for those with pictures of a broken foaming nozzle, and broken nozzle sprayer handle, c’mon man. If you’re applying enough force to break this sturdy plastic, you weren’t watching where you were planting your size 14 foot, or you’re doing it really really wrong. Even though I own a power washer and two very good foam cannons, the simplicity, ease of use, and effectiveness of this little jewel has me reaching for it time and time again. I haven’t had the o-ring blow out on me, but if it does, I’m prepared with a replacement. I can’t speak for the nylon quick connect that comes with the Torq, in that I use a brass quick connect with shutoff valve on hose end, and put a cheap orange big box store, aluminum brass colored male quick connect on spray nozzle, with absolutely no leaks. Caveat: The cheap quick connects wear out quickly. I can easily disconnect whole foam gun assembly, and replace it with your wife’s favorite 7 function spray nozzle. I’m very pleased with my purchase of the Chemical Guys Torq Foam Blaster 6.

Llegó antes de lo esperado, los materiales se ven de buena calidad, en el video estoy utilizando la pistola en el modo #5 el cual permite la mayor espuma posible, también estoy utilizando el shampoo “chemical guys”.
El líquido no dura mucho dentro del recipiente, se acaba muy rápido, pero si lo recomiendo !!!

Received mine and was pleasantly surprised that it does provide a decent foam from a mains pressure hose.