MOVOTOR Smoked LED Tail Light For Harley
Original price was: €34.95.€28.69Current price is: €28.69.
MOVOTOR Smoked LED Tail Light For Harley Price comparison
MOVOTOR Smoked LED Tail Light For Harley Price History
MOVOTOR Smoked LED Tail Light For Harley Description
MOVOTOR Smoked LED Tail Light For Harley Elevate Your Ride with Style and Safety
If you’re looking to enhance your Harley’s visibility and aesthetics, the MOVOTOR Smoked LED Tail Light is the perfect upgrade. Designed for multiple Harley models, this all-in-one tail light combines superior functionality with a sleek design that complements your motorcycle’s style. It offers the optimal blend of performance and flair, making your rides safer and more fashionable.
Key Features and Benefits
- All-in-One Functionality: This tail light serves as a running light, brake light, turn signal, and license plate light, making it a complete lighting solution for your Harley.
- Increased Visibility: With high brightness LEDs, this tail light greatly enhances your motorcycle’s rear visibility, ensuring safety during nighttime and low-light conditions.
- Streamlined Design: The low profile and laid-down style seamlessly follow the curve of your rear fender, giving your motorcycle a modern and streamlined look.
- Ease of Installation: Featuring an upgraded plug for brake and running lights, it’s easier than ever to connect the wires. The plug-and-play feature allows for quick installation without any extensive modifications.
- Compatibility: This tail light is compatible with a wide range of Harley models, including Sportster 883, Sportster 1200, Dyna, and more, from various years (1991-2010), excluding a few specific models.
Price Comparison Across Suppliers
The MOVOTOR Smoked LED Tail Light is competitively priced across various suppliers. Price may vary slightly depending on the retailer, with some offering sales or discounts. By using our price comparison tool, you can easily find the best deal available — ensuring you save money while upgrading your motorcycle.
Price Trends Over the Past Six Months
Our observed price history chart shows that the MOVOTOR Smoked LED Tail Light has remained stable in price, with slight fluctuations during promotional periods. This consistency allows potential buyers to anticipate reasonable pricing and make informed decisions without fearing sudden spikes. Overall, it’s a smart investment for Harley riders.
Summarized Customer Reviews
Customer feedback on the MOVOTOR Smoked LED Tail Light is largely positive. Riders appreciate the high brightness and the aesthetic enhancement it brings to their motorcycles. Many users have noted that the installation process was straightforward, thanks to the plug-and-play feature. However, a few reviews pointed out that compatibility with certain Harley models requires careful checking, as mismatched connections can lead to functionality issues.
Engaging Unboxing and Review Videos
Several unboxing and review videos on YouTube highlight the MOVOTOR Smoked LED Tail Light’s impressive design and practicality. These videos offer visual demonstrations of the installation process and showcase the tail light in action, so you can see firsthand why riders are raving about this upgrade. We highly recommend watching these videos to ensure you understand all aspects of the product.
Why Upgrade to the MOVOTOR Smoked LED Tail Light?
Installing the MOVOTOR Smoked LED Tail Light not only boosts your motorcycle’s visibility but also enhances its overall aesthetic appeal. Riders looking to improve safety without sacrificing style will find this product to be an invaluable addition to their bike. Whether you’re riding during the day or night, the bright LEDs ensure that you’re seen by others on the road, reducing the likelihood of accidents. Plus, with easy installation, you can switch out your tail light in a matter of minutes.
Final Thoughts
The MOVOTOR Smoked LED Tail Light for Harley combines practicality, innovation, and style. With features like enhanced visibility, sleek design, and easy installation, it’s a must-have accessory for any Harley enthusiast’s bike. Don’t miss out on upgrading your ride; compare prices now to get the best deal!
MOVOTOR Smoked LED Tail Light For Harley Specification
Specification: MOVOTOR Smoked LED Tail Light For Harley
|
MOVOTOR Smoked LED Tail Light For Harley Reviews (13)
13 reviews for MOVOTOR Smoked LED Tail Light For Harley
Only logged in customers who have purchased this product may leave a review.
Tomas –
Mejor material que otros que e comprado super impermiable y facil de instalar
Casey R –
This light looks and operates well. Its bright and much safer than the one I had before. I noticed only in photos after installation, that a couple of the white LEDs that illuminate the license plate are slightly off kilter to the others. However all of the lights do work and work well. The two offset LEDS are not noticeable from afar but something small I noticed because I have OCD lol. Overall I’m happy with how easy the installation and how well the product works.
Lubbz –
I just now installed this and it may be a little early to write a review but as of now this thing is great.
It’s light, low profile and slick, and bright.
Like many others said in the reviews, it’s plug and play and very easy to install.
For me, I only wanted the brake light but once I started playing around with all the terminals and trying it I really liked the integrated turn signals. I’ve had bikes with them before and was never really impressed but once I saw them work I dug it immediately. Problem is I don’t want to eliminate my rear signals because they add to the look of my bike.
So what I did was deviate from their wiring plan, and I wired the turn signals to my old so now I have both.
One thing I should mention is when I was testing and using the integrated signals they did fast flash, like expected, but once I wired them to the old signals they all flash normal. Of course the resistors will fix the fast flash, but if you want to use both not needing the resistor is a huge benefit.
In the future I will will keep an eye it everything and update the review as needed because I worry about it’s seal, and I also worry about how the plastic hold up in the desert sun.
Evan Grist –
This is installed on a 1995 sportster 1200.
Let me start by saying I love it, but also hate it. I have went through three different lights all with the same end result. Some of the LEDs quit lighting up. The first unit, part of the circuit board broke off, I believe a piece of copper one of the wires was soldered to. I messaged the company and they had a new unit to me in like one day which was incredible. This new unit had the same sort of issue, you would tighten it and the lights would go half out. I messaged the company again and to my surprise they decided to create a new design that would hopefully fit my bike better. The most disappointing part is even the new design I ran into the same issue. However, everything works as it should I’m just missing a few running light LEDs. This is not a huge issue as the light is still very bright and noticeable.
The customer service was awesome they worked with me the whole way and wanted me to be completely satisfied. Since they were so polite I decided to deal with the last light rather than complain. I mean it technically works, it just may look a tad bit silly, but I will deal with it for now.
I should add this is not plug and play for my bike, I soldered each wire to my bike 3 separate times, which is why I am so disappointed it doesn’t work perfectly. Although I believe the problem is due to the model and year bike. The stock tail light housing is a lot longer than this one. This tail light is a lot shorter which looks really sleek. However, the tail light mount underneath sticks out quite far to accommodate the stock incandescent bulb. I removed all that hardware to run the wiring through. Yet even with me grinding away some of the metal there I believe their just isn’t enough room. As soon as I would tighten each light down to the mount the lights would start acting up. I think the mount where the old bulb would be goes in too far and pushes on the wires where they are soldered and glued to the circuit board. Causing them to bend and start to break off.
If it worked flawlessly I would give it 5 stars but even with my issues, the excellent customer service made me feel 4 stars was appropriate.
Dakota Favara –
Really simple and came with instructions. Unplugged old and installed new light. It works/fits perfectly. Looks awesome!
Jameson Knight –
For a very inexpensive price point, works great on my Road King. Very bright and well seen if riding in a pack. Easy installation. Great warranty and customer service was quick to respond and helpful. Much appreciated
John –
when i first installed it i had the normal fast blinking, i bought resisters to fix this but before i received them this issue stopped and it now blinks normally. so i never installed them. they are waiting to be needed
Ryan Dickson –
Given the low cost I wasn’t expecting too much but thought I would try it. Installation was simple although no screws were included. Housing fit tight against the bike and it comes with a new gasket. Wiring instructions are not really clear – photos are quite dark but quick web search located the correct terminals. I did have to install a load equalizer to prevent hyper flashing. The light housing is a much lower profile than stock which gives the bike a nice clean look. All LEDs are very bright and distinct. Overall a great product – especially for the price.
Dakota Favara –
I followed the directions. Seemed easy enough. However, the amber turn signal lights stayed on. They would flash with the turn signals, but when the turn signal was turned off, the amber lights would stay on. I returned the first light through the warranty to the seller. They gave me a second one after I sent them photos of everything – which they had me do twice. That process took several days. Their shipping took almost a week to get the replacement. That light had the same problem, but in addition, the turn signals were reversed. The right turn signal on the bike activated the left light on the lens, and vice versa. I exchanged that one through Amazon. That was much faster as I had the third light one day later. Unfortunately, it has the same issue with the Amber lights staying on. The light looks great, I like the smoked lens and the lights were bright. But it isn’t working correctly on my bike.
Michael Huntington –
It dont fit correctly and inner rubber wont keep water out since screws are halfway through the rubber.
Roberto ignacio solis fonseca –
Very Good
Jameson Knight –
I bought this taillight for my 98 Dyna Super Glide. The evo motor Dynas are getting old, and there are not any cheap LED brake/tail light upgrades for them that I could find. This light will fit and work great in the stock mount, if you do a little bit of trimming to the old mount’s bulb holder area. I reshaped the mounting piece with my angle and bench grinders, and this fit right in to place. Of course I had to change the connectors as well, but overall very easy job for a low price.
I installed the light last October, and it had about 4k miles on it since then. On a recent trip from Colorado to Mexico in April, the red LEDs died (running light and brake light functions). The white license plate light and turn signals kept working fine. I recently contacted MOVOTOR through Amazon and found they have a 1 year warranty on the light. I sent them a couple pictures showing the failure, and they were happy to replace it for me. A new light was on the way quickly, and it works perfectly again.
Highly recommend them and their product!! I’m sure it’s even better on twin cam’s since it will be a very easy plug and play bolt on light.
Ryan Dickson –
Queda como original.